Daewoo Nexia

Since 1994 of release

Repair and car operation



Daewoo Nexia
+ The maintenance instruction
+ Maintenance service
+ The engine
+ 3. The engine (two top camshafts)
+ Cooling system
+ Топлевная and exhaust systems
+ Electric chain
+ 7. Ignition system
+ 8. The electronic block of management and gauges
+ Transmission
+ 10. A five-speed transmission and the main transfer RPO MM5
+ 11. Automatic Transmission
+ Steering
+ Running gear
+ 14. A forward suspension bracket
+ 15. A drive of forward wheels
+ 16. A back suspension bracket
- Brake system
   17.2. The general description
   17.3. Check of a technical condition of brake system
   17.4. Filling of a tank of the main brake cylinder
   17.5. Removal of air from brake system
   17.6. Washing of brake system
   17.7. Check of a regulator of brake forces
   17.8. Brake hoses (lobbies)
   17.9. Brake hoses (back)
   - 17.10. A lay brake
      17.10.1. The lever of a lay brake
      17.10.2. A cable of a lay brake
      17.10.3. The handle of the lever of a manual brake
   17.11. Check of a condition of forward brake overlays
   17.12. Check of a condition of back brake overlays
   17.13. Brake disks
   17.14. Brake drums
   17.15. A brake pedal
   17.16. The main brake cylinder
   17.17. A tank
   17.18. Regulators of brake forces (proportional valves)
   17.19. The main brake cylinder in gathering
   17.20. Repair of the main brake cylinder
   17.21. The disk brake mechanism
   17.22. Колодки and overlays
   17.23. A protective cover of the piston
   17.24. A brake disk
   17.25. A support
   17.26. A guard
   17.27. Support repair
   17.28. The drum-type brake mechanism
   17.29. Adjustment of the brake mechanism
   17.30. Adjustment of a lay brake
   17.31. A basic brake disk
   17.32. The wheel cylinder
   17.33. Repair of the wheel cylinder
   17.34. The vacuum amplifier of brakes
   + 17.35. Antiblocking system of brakes
   17.36. Removal of air from a brake hydraulic drive
   17.37. Removal of air from a brake hydraulic drive manually
   17.38. The valve for removal of air from the block of modulators
   17.39. Electromagnetic valves of modulators
   17.40. The block of hydraulic modulators with electric motors
   17.41. The electronic block of management of braking
   17.42. The gauge of angular speed of a forward wheel
   17.43. Flexible conducting ДУС of a forward wheel
   17.44. The gauge of angular speed of a back wheel
   + 17.45. Flexible conducting ДУС of a back wheel
   17.46. A system electric safety lock
   17.47. Relay ABS
   17.48. Signalling devices
+ Body
+ Heating, ventilation
+ Electric equipment



17.10.1. The lever of a lay brake
THE GENERAL DATA

The lever of a lay brake

201. ADJUSTING DRAUGHT
202. THE BOLT
203. THE PLUG
204. THE BOLT
205. THE PLUG
206. THE SIGNALLING DEVICE SWITCH
207. THE BOLT
208. THE LEVER
209. THE HANDLE
210. THE BUTTON
211. THE SPRING
212. THE PLATE
213. THE CAM
214. THE DIRECTING
215. DRAUGHT

To remove or disconnect

PERFORMANCE ORDER
1. To lift the car.
2. Nuts of a heat-shielding casing to lower a casing on the muffler.
3. To measure length of a free carving of adjusting draught of a lay brake (to an adjusting nut).
4. An adjusting nut 105 from draught of a lay brake.
5. A zapornuju plate and the equalizer 103.
6. The rubber plug from an aperture in the Body bottom.
7. To lower the car.
8. Back casings of directing elements of a seat.
9. A seat of the driver and to take out it from the car.
10. To wrap upwards a rug of a covering of a floor.
11. Bolts of fastening of the lever of a lay brake.
12. The lever of a lay brake 102 and to take out adjusting draught (from outside the Body bottoms).
13. The switch of a signalling device of inclusion of a lay brake from the lever 102.

To establish or attach

PERFORMANCE ORDER
1. The switch of a signalling device of inclusion of a lay brake on the lever 102. To tighten the switch the moment of 25 Nanometers.
2. The lever of a manual brake 102 to the Body arm. To tighten bolts of fastening of the lever the moment of 25 Nanometers.
3. To spread a rug into place.
4. A seat of the driver. To tighten bolts of fastening of a seat the moment of 20 Nanometers.
5. A casing of the right directing element of a seat.
6. To lower the lever of a lay brake.
7. To lift the car.
8. To put on the rubber plug adjusting draught and to insert into an aperture in the Body bottom.
9. A cable 106 to the equalizer 103.
9а. To fix on a carving shaft of draught the equalizer, a collar and to screw a new self-stopped nut that it has occupied the same position, as before dismantling.
10. To check up adjustment of a lay brake. If necessary to adjust anew, subsection 17.28 see.
11. A heat-shielding casing.
12. To lower the car.