Daewoo Nexia

Since 1994 of release

Repair and car operation



Daewoo Nexia
+ The maintenance instruction
+ Maintenance service
+ The engine
+ 3. The engine (two top camshafts)
+ Cooling system
+ Топлевная and exhaust systems
+ Electric chain
+ 7. Ignition system
+ 8. The electronic block of management and gauges
+ Transmission
+ 10. A five-speed transmission and the main transfer RPO MM5
+ 11. Automatic Transmission
+ Steering
+ Running gear
+ 14. A forward suspension bracket
+ 15. A drive of forward wheels
+ 16. A back suspension bracket
- Brake system
   17.2. The general description
   17.3. Check of a technical condition of brake system
   17.4. Filling of a tank of the main brake cylinder
   17.5. Removal of air from brake system
   17.6. Washing of brake system
   17.7. Check of a regulator of brake forces
   17.8. Brake hoses (lobbies)
   17.9. Brake hoses (back)
   + 17.10. A lay brake
   17.11. Check of a condition of forward brake overlays
   17.12. Check of a condition of back brake overlays
   17.13. Brake disks
   17.14. Brake drums
   17.15. A brake pedal
   17.16. The main brake cylinder
   17.17. A tank
   17.18. Regulators of brake forces (proportional valves)
   17.19. The main brake cylinder in gathering
   17.20. Repair of the main brake cylinder
   17.21. The disk brake mechanism
   17.22. Колодки and overlays
   17.23. A protective cover of the piston
   17.24. A brake disk
   17.25. A support
   17.26. A guard
   17.27. Support repair
   17.28. The drum-type brake mechanism
   17.29. Adjustment of the brake mechanism
   17.30. Adjustment of a lay brake
   17.31. A basic brake disk
   17.32. The wheel cylinder
   17.33. Repair of the wheel cylinder
   17.34. The vacuum amplifier of brakes
   + 17.35. Antiblocking system of brakes
   17.36. Removal of air from a brake hydraulic drive
   17.37. Removal of air from a brake hydraulic drive manually
   17.38. The valve for removal of air from the block of modulators
   17.39. Electromagnetic valves of modulators
   17.40. The block of hydraulic modulators with electric motors
   17.41. The electronic block of management of braking
   17.42. The gauge of angular speed of a forward wheel
   17.43. Flexible conducting ДУС of a forward wheel
   17.44. The gauge of angular speed of a back wheel
   + 17.45. Flexible conducting ДУС of a back wheel
   17.46. A system electric safety lock
   17.47. Relay ABS
   17.48. Signalling devices
+ Body
+ Heating, ventilation
+ Electric equipment



17.23. A protective cover of the piston To remove or disconnect

Support dismantling

AND. THE FACE KEY

4. THE INTERNAL PART OF THE CASE OF THE SUPPORT
24. THE EXTERNAL PART OF THE CASE OF THE SUPPORT

Dismantle of a protective cover of the piston

AND. THE CHISEL

7. THE PROTECTIVE COVER OF THE PISTON
12. THE NAVE

PERFORMANCE ORDER
1. To turn out bolts 23 and to separate external 4 and internal 24 parts of the case скобы.
2. The lock screw 17 and a disk 13.
3. To weaken landing of a cover 7 in the case скобы by means of a chisel and to remove a cover a screw-driver.

To establish or attach

PERFORMANCE ORDER
1. To put on a protective cover 7 in a flute of the piston and запрессовать a cover in a case aperture скобы. If necessary a few to squeeze out the piston from the cylinder скобы, to put on a cover.
2. A protective cover 7 by means of adaptation KM-405.
3. A disk and the lock screw.
4. Bolts 23. To tighten coupling bolts the moment of 95 Nanometers.






электрик по совместительству в ногинске