Daewoo Nexia

Since 1994 of release

Repair and car operation



Daewoo Nexia
+ The maintenance instruction
+ Maintenance service
+ The engine
+ 3. The engine (two top camshafts)
+ Cooling system
+ Топлевная and exhaust systems
+ Electric chain
+ 7. Ignition system
+ 8. The electronic block of management and gauges
+ Transmission
+ 10. A five-speed transmission and the main transfer RPO MM5
+ 11. Automatic Transmission
+ Steering
+ Running gear
+ 14. A forward suspension bracket
+ 15. A drive of forward wheels
+ 16. A back suspension bracket
- Brake system
   17.2. The general description
   17.3. Check of a technical condition of brake system
   17.4. Filling of a tank of the main brake cylinder
   17.5. Removal of air from brake system
   17.6. Washing of brake system
   17.7. Check of a regulator of brake forces
   17.8. Brake hoses (lobbies)
   17.9. Brake hoses (back)
   + 17.10. A lay brake
   17.11. Check of a condition of forward brake overlays
   17.12. Check of a condition of back brake overlays
   17.13. Brake disks
   17.14. Brake drums
   17.15. A brake pedal
   17.16. The main brake cylinder
   17.17. A tank
   17.18. Regulators of brake forces (proportional valves)
   17.19. The main brake cylinder in gathering
   17.20. Repair of the main brake cylinder
   17.21. The disk brake mechanism
   17.22. Колодки and overlays
   17.23. A protective cover of the piston
   17.24. A brake disk
   17.25. A support
   17.26. A guard
   17.27. Support repair
   17.28. The drum-type brake mechanism
   17.29. Adjustment of the brake mechanism
   17.30. Adjustment of a lay brake
   17.31. A basic brake disk
   17.32. The wheel cylinder
   17.33. Repair of the wheel cylinder
   17.34. The vacuum amplifier of brakes
   + 17.35. Antiblocking system of brakes
   17.36. Removal of air from a brake hydraulic drive
   17.37. Removal of air from a brake hydraulic drive manually
   17.38. The valve for removal of air from the block of modulators
   17.39. Electromagnetic valves of modulators
   17.40. The block of hydraulic modulators with electric motors
   17.41. The electronic block of management of braking
   17.42. The gauge of angular speed of a forward wheel
   17.43. Flexible conducting ДУС of a forward wheel
   17.44. The gauge of angular speed of a back wheel
   + 17.45. Flexible conducting ДУС of a back wheel
   17.46. A system electric safety lock
   17.47. Relay ABS
   17.48. Signalling devices
+ Body
+ Heating, ventilation
+ Electric equipment


1cb365f7

17.8. Brake hoses (lobbies)
THE GENERAL DATA

Arrangement of brake pipelines

1. THE BRAKE HOSE LEFT
2. THE BRAKE PIPELINE
3. THE BRAKE HOSE RIGHT
4. THE MAIN BRAKE CYLINDER
5. FASTENING OF PIPELINES
6. THE BRAKE HOSE RIGHT
7. THE BRAKE HOSE LEFT
8. THE PIPELINE CLAMP

Hose of a forward right brake

2. THE BRAKE PIPELINE
3. THE BRAKE HOSE OF THE RIGHT FORWARD BRAKE
5. ЗАПОРНАЯ THE PLATE
10. THE SUPPORT RIGHT
11. THE HOLLOW BOLT
12. THE LINING

To remove or disconnect

LEFT-HAND SIDE

PERFORMANCE ORDER
1. To lift the car.
2. The brake pipeline from a hose.
3. A zapornuju plate, a brake hose from an arm in a wheel niche.
4. A hollow bolt 11 from brake скобы 10, linings 12 and a hose.

THE RIGHT PARTY

PERFORMANCE ORDER
1. The brake pipeline from a hose.
2. A zapornuju plate.
3. A brake hose from an arm.
4. A hollow bolt 11 from brake скобы 10, linings 12 and a hose.

To establish or attach

PERFORMANCE ORDER
1. A new brake hose to скобе by means of new linings and a hollow bolt.
2. The left hose with запорной a plate to an arm in a wheel niche. To tighten a bolt of an arm the moment of 80 Nanometers.
3. The brake pipeline to a hose. To tighten connection by the moment of 16 Nanometers.
4. The right hose to an arm on a lateral surface of a stretcher (correctly to focus the flat parties).
5. A zapornuju plate.
6. The brake pipeline to a hose. To tighten connection by the moment of 16 Nanometers.
7. To lower the car.
8. To remove air from system.
9. To check up tightness of system.