Daewoo Nexia

Since 1994 of release

Repair and car operation



Daewoo Nexia
+ The maintenance instruction
+ Maintenance service
+ The engine
+ 3. The engine (two top camshafts)
+ Cooling system
+ Топлевная and exhaust systems
+ Electric chain
+ 7. Ignition system
+ 8. The electronic block of management and gauges
+ Transmission
+ 10. A five-speed transmission and the main transfer RPO MM5
+ 11. Automatic Transmission
+ Steering
+ Running gear
+ 14. A forward suspension bracket
+ 15. A drive of forward wheels
+ 16. A back suspension bracket
- Brake system
   17.2. The general description
   17.3. Check of a technical condition of brake system
   17.4. Filling of a tank of the main brake cylinder
   17.5. Removal of air from brake system
   17.6. Washing of brake system
   17.7. Check of a regulator of brake forces
   17.8. Brake hoses (lobbies)
   17.9. Brake hoses (back)
   + 17.10. A lay brake
   17.11. Check of a condition of forward brake overlays
   17.12. Check of a condition of back brake overlays
   17.13. Brake disks
   17.14. Brake drums
   17.15. A brake pedal
   17.16. The main brake cylinder
   17.17. A tank
   17.18. Regulators of brake forces (proportional valves)
   17.19. The main brake cylinder in gathering
   17.20. Repair of the main brake cylinder
   17.21. The disk brake mechanism
   17.22. Колодки and overlays
   17.23. A protective cover of the piston
   17.24. A brake disk
   17.25. A support
   17.26. A guard
   17.27. Support repair
   17.28. The drum-type brake mechanism
   17.29. Adjustment of the brake mechanism
   17.30. Adjustment of a lay brake
   17.31. A basic brake disk
   17.32. The wheel cylinder
   17.33. Repair of the wheel cylinder
   17.34. The vacuum amplifier of brakes
   + 17.35. Antiblocking system of brakes
   17.36. Removal of air from a brake hydraulic drive
   17.37. Removal of air from a brake hydraulic drive manually
   17.38. The valve for removal of air from the block of modulators
   17.39. Electromagnetic valves of modulators
   17.40. The block of hydraulic modulators with electric motors
   17.41. The electronic block of management of braking
   17.42. The gauge of angular speed of a forward wheel
   17.43. Flexible conducting ДУС of a forward wheel
   17.44. The gauge of angular speed of a back wheel
   + 17.45. Flexible conducting ДУС of a back wheel
   17.46. A system electric safety lock
   17.47. Relay ABS
   17.48. Signalling devices
+ Body
+ Heating, ventilation
+ Electric equipment


1cb365f7

17.21. The disk brake mechanism
THE GENERAL DATA

The disk brake mechanism

1. РАЗЖИМНЫЕ SPRINGS
2. INTERNAL BRAKE КОЛОДКА
3. EXTERNAL BRAKE КОЛОДКА
4. THE INTERNAL PART OF CASE SKOBY
5. PROTECTIVE CAPS OF HEADS OF BOLTS
6. FIXING BOLTS
7. THE PROTECTIVE COVER OF THE PISTON
8. PISTON CONSOLIDATION
9. THE PISTON
10. PINS
11. THE GUARD
12. THE NAVE
13. THE BRAKE DISK
14. ШПЛИНТ
15. КОРОНЧАТАЯ THE NUT
16. THE WASHER
17. THE LOCK SCREW
18. THE SCREW OF FASTENING OF THE GUARD
19. THE WASHER
20. DIRECTING PLUGS
21. PLUG CONSOLIDATION
22. INTERNAL PROTECTIVE CAPS
23. COUPLING BOLTS СКОБЫ
24. THE EXTERNAL PART OF CASE SKOBY

In mobile скобе a disk brake one aperture for placing of the piston of the wheel cylinder is executed. Скоба it is fixed on an arm of a telescopic rack of a forward suspension bracket. Floating скоба has possibility small axial moving along two directing. The pressure of a liquid developed in brake system by pressing a brake pedal, will be transformed by the mechanism скобы owing to pressing brake колодок to вращающе муся to a disk. Pressure of a working liquid operates simultaneously on the piston of the wheel cylinder and on the case floating скобы. At braking the piston and скоба move towards to each other, providing synchronous pressing brake колодок to a disk and car delay.

At repair скобы a disk brake it is necessary to replace all details entering into the repair complete set.

For simplification of installation to grease rubber details with a fresh brake liquid.

It is forbidden to blow and dry details of a brake hydrodrive the compressed air from an industrial network as butter containing in churned air will put out of action rubber consolidations.

At dismantle or a detachment of pipelines and hydrodrive knots it is necessary to remove after assemblage air from all system or separate contours.

To replace brake Pads follows completely.

The resulted moments of an inhaling of carving connections are given for dry fixing details without lubricant.

All repair work is necessary for making on a pure workbench. It is necessary to accept safety measures for an exception of possibility of hit on a detail of a hydrodrive of mineral oils.