Daewoo Nexia

Since 1994 of release

Repair and car operation



Daewoo Nexia
+ The maintenance instruction
+ Maintenance service
+ The engine
+ 3. The engine (two top camshafts)
+ Cooling system
+ Топлевная and exhaust systems
+ Electric chain
+ 7. Ignition system
+ 8. The electronic block of management and gauges
+ Transmission
+ 10. A five-speed transmission and the main transfer RPO MM5
+ 11. Automatic Transmission
+ Steering
+ Running gear
+ 14. A forward suspension bracket
+ 15. A drive of forward wheels
+ 16. A back suspension bracket
- Brake system
   17.2. The general description
   17.3. Check of a technical condition of brake system
   17.4. Filling of a tank of the main brake cylinder
   17.5. Removal of air from brake system
   17.6. Washing of brake system
   17.7. Check of a regulator of brake forces
   17.8. Brake hoses (lobbies)
   17.9. Brake hoses (back)
   + 17.10. A lay brake
   17.11. Check of a condition of forward brake overlays
   17.12. Check of a condition of back brake overlays
   17.13. Brake disks
   17.14. Brake drums
   17.15. A brake pedal
   17.16. The main brake cylinder
   17.17. A tank
   17.18. Regulators of brake forces (proportional valves)
   17.19. The main brake cylinder in gathering
   17.20. Repair of the main brake cylinder
   17.21. The disk brake mechanism
   17.22. Колодки and overlays
   17.23. A protective cover of the piston
   17.24. A brake disk
   17.25. A support
   17.26. A guard
   17.27. Support repair
   17.28. The drum-type brake mechanism
   17.29. Adjustment of the brake mechanism
   17.30. Adjustment of a lay brake
   17.31. A basic brake disk
   17.32. The wheel cylinder
   17.33. Repair of the wheel cylinder
   17.34. The vacuum amplifier of brakes
   + 17.35. Antiblocking system of brakes
   17.36. Removal of air from a brake hydraulic drive
   17.37. Removal of air from a brake hydraulic drive manually
   17.38. The valve for removal of air from the block of modulators
   17.39. Electromagnetic valves of modulators
   17.40. The block of hydraulic modulators with electric motors
   17.41. The electronic block of management of braking
   17.42. The gauge of angular speed of a forward wheel
   17.43. Flexible conducting ДУС of a forward wheel
   17.44. The gauge of angular speed of a back wheel
   + 17.45. Flexible conducting ДУС of a back wheel
   17.46. A system electric safety lock
   17.47. Relay ABS
   17.48. Signalling devices
+ Body
+ Heating, ventilation
+ Electric equipment



17.40. The block of hydraulic modulators with electric motors To remove or disconnect

Detachment of a socket of electroconducting ЭМК of the modulator

515. THE VALVE FOR REMOVAL OF AIR FROM THE BLOCK OF MODULATORS
516. THE BLOCK OF MODULATORS IN GATHERING WITH ELECTRIC MOTORS
560. THE HOSE OF THE BROAD TANK

Detachment of a hose from a broad tank

560. THE HOSE OF THE BROAD TANK
551. THE HOSE OF THE MODULATION OF THE COOLING LIQUID
552. THE BROAD TANK

Detachment of an electric socket of the block of electric motors

516. THE BLOCK OF MODULATORS IN GATHERING WITH ELECTRIC MOTORS
518. THE ELECTRIC SOCKET OF THE BLOCK OF ELECTRIC MOTORS

Detachment of pipelines from the block of modulators

516. THE BLOCK OF MODULATORS IN GATHERING WITH ELECTRIC MOTORS
520А. PIPELINES OF THE BLOCK OF MODULATORS (FROM THE MAIN BRAKE CYLINDER)

Dismantle of the block of modulators in gathering with electric motors

516. THE BLOCK OF MODULATORS IN GATHERING WITH ELECTRIC MOTORS

PERFORMANCE ORDER
1. By means of device SCANNER-11 to remove a tightness of gear wheels of a drive of pistons of modulators.
2. A negative wire of the storage battery.
3. To lower pressure in a broad tank, cautiously having uncovered a tank after cooling of the engine and a cooling liquid.
4. A collar and a hose from a broad tank, fig. the Detachment of a hose from a broad tank.
5. Electric sockets ЭМК and the block of electric motors, fig. the Detachment of a socket of electroconducting ЭМК of the modulator, fig. the Detachment of an electric socket of the block of electric motors. To enclose rags under pipelines of the block of modulators for protection of electric sockets against hit of a brake liquid.
6. Six brake pipelines from the block of modulators, fig. the Detachment of pipelines from the block of modulators. To muffle apertures of pipelines in order to avoid pollution and losses of a brake liquid.
7. To turn away three nuts, to remove "a mass" wire and to dismantle from the car the block of modulators in gathering with electric motors, fig. Dismantle of the block of modulators in gathering with electric motors.

To establish or attach

PERFORMANCE ORDER
1. The block of modulators in gathering with electric motors and "a mass" wire to screw three nuts. To tighten nuts of fastening of the block of modulators the moment of 5,4 Nanometers. To remove заглушки from apertures of brake pipelines and unions of the block of modulators. To attach pipelines to unions and to fix nuts. To tighten штуцерные nuts of fastening of brake pipelines the moment of 15 Nanometers.
2. Electric sockets ЭМК and the block of electric motors.
3. A hose to a broad tank. To fix a collar.
4. A negative wire of the storage battery.
5. To remove air from a brake hydrodrive.
6. To check up level of a cooling liquid. If necessary to add a mix этиленгликолевого antifreeze and water in a proportion 1:1. To finish level of a cooling liquid to norm.