Daewoo Nexia

Since 1994 of release

Repair and car operation



Daewoo Nexia
+ The maintenance instruction
+ Maintenance service
+ The engine
+ 3. The engine (two top camshafts)
+ Cooling system
+ Топлевная and exhaust systems
+ Electric chain
+ 7. Ignition system
+ 8. The electronic block of management and gauges
+ Transmission
+ 10. A five-speed transmission and the main transfer RPO MM5
+ 11. Automatic Transmission
+ Steering
+ Running gear
+ 14. A forward suspension bracket
+ 15. A drive of forward wheels
+ 16. A back suspension bracket
- Brake system
   17.2. The general description
   17.3. Check of a technical condition of brake system
   17.4. Filling of a tank of the main brake cylinder
   17.5. Removal of air from brake system
   17.6. Washing of brake system
   17.7. Check of a regulator of brake forces
   17.8. Brake hoses (lobbies)
   17.9. Brake hoses (back)
   + 17.10. A lay brake
   17.11. Check of a condition of forward brake overlays
   17.12. Check of a condition of back brake overlays
   17.13. Brake disks
   17.14. Brake drums
   17.15. A brake pedal
   17.16. The main brake cylinder
   17.17. A tank
   17.18. Regulators of brake forces (proportional valves)
   17.19. The main brake cylinder in gathering
   17.20. Repair of the main brake cylinder
   17.21. The disk brake mechanism
   17.22. Колодки and overlays
   17.23. A protective cover of the piston
   17.24. A brake disk
   17.25. A support
   17.26. A guard
   17.27. Support repair
   17.28. The drum-type brake mechanism
   17.29. Adjustment of the brake mechanism
   17.30. Adjustment of a lay brake
   17.31. A basic brake disk
   17.32. The wheel cylinder
   17.33. Repair of the wheel cylinder
   17.34. The vacuum amplifier of brakes
   + 17.35. Antiblocking system of brakes
   17.36. Removal of air from a brake hydraulic drive
   17.37. Removal of air from a brake hydraulic drive manually
   17.38. The valve for removal of air from the block of modulators
   17.39. Electromagnetic valves of modulators
   17.40. The block of hydraulic modulators with electric motors
   17.41. The electronic block of management of braking
   17.42. The gauge of angular speed of a forward wheel
   17.43. Flexible conducting ДУС of a forward wheel
   17.44. The gauge of angular speed of a back wheel
   + 17.45. Flexible conducting ДУС of a back wheel
   17.46. A system electric safety lock
   17.47. Relay ABS
   17.48. Signalling devices
+ Body
+ Heating, ventilation
+ Electric equipment



17.33. Repair of the wheel cylinder
THE GENERAL DATA

The wheel cylinder

301. THE PROTECTIVE COVER
302. THE PISTON
303. CONSOLIDATION
304. РАЗЖИМНАЯ THE SPRING
305. THE VALVE CAP
306. THE VALVE FOR AIR REMOVAL
307. THE WHEEL CYLINDER

To disassemble

PERFORMANCE ORDER
1. To dismantle the wheel cylinder 307 from a basic disk.
2. Protective covers 301.
3. Pistons 302 and consolidations 303.
4. A razzhimnuju spring 304.
5. A cap 305 and the valve 306 for air removal.

To check up

PERFORMANCE ORDER
1. A mirror of the wheel cylinder and pistons 302 on presence:
     – Scratches;
     – Dents;
     – Corrosion traces;
     – Wear tracks.
2. To remove by means of soft безворсовой fabrics easy traces of corrosion from a cylinder mirror. If it is not possible to remove corrosion traces, to replace the wheel cylinder.

To clear

PERFORMANCE ORDER
1. To wash out all details spirit or a fresh brake liquid.
2. To dry up details a stream of the compressed air which is not containing oils.
3. Before assemblage to grease a cylinder mirror, pistons, consolidations by a fresh brake liquid.

To collect
The prevention

Before assemblage to apply a thin film pastes for brake cylinders on a mirror of the cylinder and all new rubber details (except protective covers).


PERFORMANCE ORDER
1. To screw the valve 306 and to put on a cap 305.
2. To insert a spring 304.
3. Consolidations 303 and pistons 302.
4. Protective covers 301.
5. To check up free moving of pistons 302 in the cylinder.
6. To fix the wheel cylinder on a brake basic disk 4.