Daewoo Nexia

Since 1994 of release

Repair and car operation

Daewoo Nexia
+ The maintenance instruction
+ Maintenance service
+ The engine
+ 3. The engine (two top camshafts)
+ Cooling system
+ Топлевная and exhaust systems
+ Electric chain
+ 7. Ignition system
+ 8. The electronic block of management and gauges
+ Transmission
+ 10. A five-speed transmission and the main transfer RPO MM5
+ 11. Automatic Transmission
+ Steering
+ Running gear
+ 14. A forward suspension bracket
+ 15. A drive of forward wheels
+ 16. A back suspension bracket
- Brake system
   17.2. The general description
   17.3. Check of a technical condition of brake system
   17.4. Filling of a tank of the main brake cylinder
   17.5. Removal of air from brake system
   17.6. Washing of brake system
   17.7. Check of a regulator of brake forces
   17.8. Brake hoses (lobbies)
   17.9. Brake hoses (back)
   + 17.10. A lay brake
   17.11. Check of a condition of forward brake overlays
   17.12. Check of a condition of back brake overlays
   17.13. Brake disks
   17.14. Brake drums
   17.15. A brake pedal
   17.16. The main brake cylinder
   17.17. A tank
   17.18. Regulators of brake forces (proportional valves)
   17.19. The main brake cylinder in gathering
   17.20. Repair of the main brake cylinder
   17.21. The disk brake mechanism
   17.22. Колодки and overlays
   17.23. A protective cover of the piston
   17.24. A brake disk
   17.25. A support
   17.26. A guard
   17.27. Support repair
   17.28. The drum-type brake mechanism
   17.29. Adjustment of the brake mechanism
   17.30. Adjustment of a lay brake
   17.31. A basic brake disk
   17.32. The wheel cylinder
   17.33. Repair of the wheel cylinder
   17.34. The vacuum amplifier of brakes
   + 17.35. Antiblocking system of brakes
   17.36. Removal of air from a brake hydraulic drive
   17.37. Removal of air from a brake hydraulic drive manually
   17.38. The valve for removal of air from the block of modulators
   17.39. Electromagnetic valves of modulators
   17.40. The block of hydraulic modulators with electric motors
   17.41. The electronic block of management of braking
   17.42. The gauge of angular speed of a forward wheel
   17.43. Flexible conducting ДУС of a forward wheel
   17.44. The gauge of angular speed of a back wheel
   + 17.45. Flexible conducting ДУС of a back wheel
   17.46. A system electric safety lock
   17.47. Relay ABS
   17.48. Signalling devices
+ Body
+ Heating, ventilation
+ Electric equipment

17.15. A brake pedal

THE GENERAL DATA

Suspension bracket of a brake pedal

301. THE ARM
302. THE ARM OF THE SUSPENSION BRACKET OF THE PEDAL
303. THE SPRING CLAMP
304. THE NUT
305. THE WASHER
306. THE AXIS
307. THE RETURNABLE SPRING
308. THE PEDAL
309. THE PEDAL OVERLAY

To remove or disconnect

PERFORMANCE ORDER

1. The switch a stoplight.

2. A returnable spring 307.

3. A plug and a pusher finger.

4. A spring clamp 303 from an axis of 306 pedals.

5. A nut 304 and a washer 305. To take out an axis 306 to the left.

6. A brake pedal 308. To notice an arrangement of a returnable spring.

To establish or attach

PERFORMANCE ORDER

1. An overlay 309 on a new pedal.

2. A brake pedal 308. To establish a returnable spring in initial position.

3. An axis of 306 pedals. To insert on the left side. Before installation to grease an axis.

4. A nut 304 and a washer 305 on an axis 306. To tighten a nut 304 moment of 18 Nanometers.

5. A pusher plug to insert a finger.

6. A spring clamp 303 on an axis 306.

7. The stoplight switch.