Daewoo Nexia

Since 1994 of release

Repair and car operation

Daewoo Nexia
+ The maintenance instruction
+ Maintenance service
+ The engine
+ 3. The engine (two top camshafts)
+ Cooling system
+ Топлевная and exhaust systems
+ Electric chain
+ 7. Ignition system
+ 8. The electronic block of management and gauges
+ Transmission
+ 10. A five-speed transmission and the main transfer RPO MM5
+ 11. Automatic Transmission
- Steering
   12.2. The general description
   12.3. The reechnyj steering mechanism in gathering
   12.4. Tips of steering draughts
   12.5. Steering draughts
   12.6. A casing картера the steering mechanism
   12.7. Муфта a steering shaft
   12.8. A sealing cover of an aperture of a forward board of the Body
   12.9. Плунжер рейки
   12.10. The Shaft-gear wheel
   12.11. Рейка
   12.12. The needle bearing
   12.13. The directing plug рейки
   12.14. Check of neutral position рейки
   12.15. Recommendations about replacement of consolidations in the hydraulic booster
   12.16. Check of level and having added a working liquid
   12.17. Removal of air from hydrosystem
   12.18. The steering mechanism with the hydraulic booster in gathering
   12.19. Hoses and pipelines
   12.20. A tank
   12.21. Tips of steering draughts
   12.22. Steering draughts
   12.23. Plugs of hinges of steering draughts
   12.24. Муфта a steering shaft
   12.25. A sealing cover
   12.26. Hydrocylinder pipelines
   12.27. Adjustment of a preliminary tightness of a spring плунжера
   12.28. Consolidations of a shaft of the hydrodistributor and the top bearing
   12.29. The steering mechanism
   12.30. Check of neutral position рейки
   12.31. A belt of a drive of the pump
   12.32. A pulley of a drive of the pump
   12.33. The pump in gathering
   12.34. Control levers on a steering column
   12.35. A steering wheel
   12.36. The ignition lock
   12.37. A steering column
   12.38. Lever the switch, a steering shaft, a steering column (noncontrollable)
   12.39. Lever the switch, a steering shaft, a steering column (regulated)
+ Running gear
+ 14. A forward suspension bracket
+ 15. A drive of forward wheels
+ 16. A back suspension bracket
+ Brake system
+ Body
+ Heating, ventilation
+ Electric equipment

12.9. Плунжер рейки

THE GENERAL DATA

Plunzhernyj knot рейки

AND. BEFORE ASSEMBLAGE TO PUT LAYER ЛИТИЕВОЙ OF GREASING

40. ПЛУНЖЕР
41. THE SEALING RING
42. THE SPRING
43. THE ADJUSTING STOPPER
44. THE COUNTERNUT

Check of size of the moment of a friction of the steering mechanism

AND. THE TIP IN THE SIZE 15 MM

5. THE SHAFT THE GEAR WHEEL
44. THE COUNTERNUT

To remove or disconnect

PERFORMANCE ORDER

1. To turn away a counternut 44.

2. To turn away an adjusting stopper 43.

3. To take out a spring 42.

4. A sealing ring 41.

5. Плунжер 40.

To establish or attach

PERFORMANCE ORDER

1. Плунжер 40.

2. A sealing ring 41.

3. A spring 42.

4. To screw an adjusting stopper 43.

5. To wrap a counternut 44.

6. To establish рейку in average position to tighten an adjusting stopper the moment of 11 Nanometers. Then to turn away a stopper 43 on 50–70 degrees. To check up the friction moment on a shaft-gear wheel which should be equal 1,2 Nanometers.

7. To screw a counternut 44 and to tighten it for fixing of an adjusting stopper 43.

8. To tighten a counternut of an adjusting stopper the moment of 70 Nanometers.