Daewoo Nexia

Since 1994 of release

Repair and car operation



Daewoo Nexia
+ The maintenance instruction
+ Maintenance service
+ The engine
+ 3. The engine (two top camshafts)
+ Cooling system
+ Топлевная and exhaust systems
+ Electric chain
+ 7. Ignition system
+ 8. The electronic block of management and gauges
+ Transmission
+ 10. A five-speed transmission and the main transfer RPO MM5
+ 11. Automatic Transmission
- Steering
   12.2. The general description
   12.3. The reechnyj steering mechanism in gathering
   12.4. Tips of steering draughts
   12.5. Steering draughts
   12.6. A casing картера the steering mechanism
   12.7. Муфта a steering shaft
   12.8. A sealing cover of an aperture of a forward board of the Body
   12.9. Плунжер рейки
   12.10. The Shaft-gear wheel
   12.11. Рейка
   12.12. The needle bearing
   12.13. The directing plug рейки
   12.14. Check of neutral position рейки
   12.15. Recommendations about replacement of consolidations in the hydraulic booster
   12.16. Check of level and having added a working liquid
   12.17. Removal of air from hydrosystem
   12.18. The steering mechanism with the hydraulic booster in gathering
   12.19. Hoses and pipelines
   12.20. A tank
   12.21. Tips of steering draughts
   12.22. Steering draughts
   12.23. Plugs of hinges of steering draughts
   12.24. Муфта a steering shaft
   12.25. A sealing cover
   12.26. Hydrocylinder pipelines
   12.27. Adjustment of a preliminary tightness of a spring плунжера
   12.28. Consolidations of a shaft of the hydrodistributor and the top bearing
   12.29. The steering mechanism
   12.30. Check of neutral position рейки
   12.31. A belt of a drive of the pump
   12.32. A pulley of a drive of the pump
   12.33. The pump in gathering
   12.34. Control levers on a steering column
   12.35. A steering wheel
   12.36. The ignition lock
   12.37. A steering column
   12.38. Lever the switch, a steering shaft, a steering column (noncontrollable)
   12.39. Lever the switch, a steering shaft, a steering column (regulated)
+ Running gear
+ 14. A forward suspension bracket
+ 15. A drive of forward wheels
+ 16. A back suspension bracket
+ Brake system
+ Body
+ Heating, ventilation
+ Electric equipment



12.3. The reechnyj steering mechanism in gathering
THE GENERAL DATA

The reechnyj steering mechanism

 

1. COUPLING BOLT МУФТЫ
2. МУФТА
3. The SEALING COVER of the APERTURE of the FORWARD BOARD of the Body
4. SHAFT-GEAR WHEEL CONSOLIDATION
5. THE SHAFT-GEAR WHEEL IN GATHERING
6. THE NEEDLE BEARING
7. CARTER OF THE STEERING MECHANISM
8. ЗАГЛУШКА CARTER (LEFT)
9. THE RUBBER ASSEMBLY PLUG
10. DIRECTING PLANCK РЕЙКИ
11. THE SPRING RING
12. IT IS NOT USED
13. THE BOLT (ONLY FOR CARS WITH AUTOMATIC TRANSMISSION)
14. THE COLLAR (ONLY FOR CARS WITH AUTOMATIC TRANSMISSION)
15. THE NUT (ONLY FOR CARS WITH AUTOMATIC TRANSMISSION)
16. THE CASING PLUG
17. THE CASING COLLAR
18. THE ADJUSTING SCREW
19. THE TIP OF STEERING DRAUGHT (LEFT)
20. THE SEALING COVER
21. THE NUT
22. THE COUPLING BOLT
23. STEERING DRAUGHT (LEFT)
24. THE FIXING PLATE
25. THE BOLT
26. THE BASIC PLATE (ONLY FOR CARS WITH THE MANUAL TRANSMISSION)
27. PLUG SHARNIPA OF STEERING DRAUGHT
28. THE TIP OF STEERING DRAUGHT (RIGHT)
29. STEERING DRAUGHT (RIGHT)
30. THE WASHER
31. THE CASING COLLAR
32. CARTER'S CASING
33. ДЕМПФЕР THE STEERING (ONLY FOR CARS WITH AUTOMATIC TRANSMISSION)
34. РЕЙКА
35. ЗАГЛУШКА CARTER (RIGHT)
36. THE RUBBER ASSEMBLY PLUG
37. THE CASING PLUG
38. THE SPRING RING
39. DIRECTING PLUG REJKI
40. ПЛУНЖЕР
41. THE SEALING RING
42. THE SPRING
43. THE ADJUSTING STOPPER
44. THE COUNTERNUT

Муфта a steering shaft

1. THE COUPLING BOLT
2. МУФТА IN GATHERING

To remove or disconnect

Fastening реечного the steering mechanism

45. THE BOLT
46. THE COLLAR OF FASTENING OF CARTER

PERFORMANCE ORDER
1. A negative wire of the storage battery.
2. To lift and properly to fix the car.
3. To turn out two coupling bolts 1 of муфты 2 and to shift it upwards on a shaft of a steering column. (Operated wheels should be in position of rectilinear movement).
4. An air cleaner.
5. To turn out both bolts 25, крепящих the internal ends of steering bent for рейке. Before вывертыванием bolts to unbend and remove a plate 24 which fixes heads of bolts. The plate 24 will not enclose to a reuse.
6. Демпфер a steering (if it is established on the car).
7. Both collars of fastening of the steering mechanism.
8. A sealing cover 3 from a shaft-gear wheel.
9. The steering mechanism in gathering through an aperture of a niche of the right wheel.
The prevention

If together with collars of fastening of the steering mechanism bolts have been dismantled, it is necessary to screw them into place and to tighten the moment of 20 Nanometers.



To establish or attach

Fastening of hinges of steering bent for рейке

23. STEERING DRAUGHT (LEFT)
24. THE FIXING PLATE
25. THE BOLT
26. THE BASIC PLATE
29. STEERING DRAUGHT (RIGHT)
32. CARTER'S CASING

Dismantle of steering draught


(ONLY FOR CARS WITH AUTOMATIC TRANSMISSION)
AND. POSITION OF CUTS ON THE FIXING PLATE AT INSTALLATION
CENTURY THE WRENCH
WITH. FOR SIMPLIFICATION OF INSTALLATION TO APPLY A THIN FILM КОНСИСТЕНТНОЙ GREASINGS ON THE PLUG

(ONLY FOR CARS WITH THE MANUAL TRANSMISSION)
23. STEERING DRAUGHT (LEFT)
21. THE FIXING PLATE
25. THE BOLT
26. THE BASIC PLATE (ONLY FOR CARS WITH THE MANUAL TRANSMISSION)
27. THE PLUG OF THE HINGE OF STEERING DRAUGHT
30. THE WASHER
32. CARTER'S CASING
33. ДЕМПФЕР THE STEERING (ONLY FOR CARS WITH AUTOMATIC TRANSMISSION)
 

PERFORMANCE ORDER
1. The steering mechanism in gathering through an aperture of a niche of the right wheel.
2. A sealing cover 3 on a shaft-gear wheel.
3. Both collars of fastening of the steering mechanism. (It is necessary to use only new самоконтрящиеся nuts). 3атянуть nuts and bolts of fastening of collars of the steering mechanism the moment of 35 Nanometers.
4. Демпфер a steering (if it has been established on the car).
5. To establish two washers 30 which should be between a directing lath 10 and the internal ends of steering draughts.
6. To attach bolts 25 internal ends of steering draughts 23, 29 to directing lath 10. To tighten bolts of fastening of steering bent for рейке the steering mechanism the moment of 90 Nanometers.
7. To establish on a basic plate 26 and on heads of bolts 25 fixing plate 24. Cuts on a fixing plate should settle down how is shown on fig. Dismantle of steering draught.
8. To lower and put on муфту 2 the end of a shaft-gear wheel 5. To tighten fastening bolts муфты a steering shaft the moment of 25 Nanometers.
9. An air cleaner.
10. To lower the car.
11. To attach a negative wire of the storage battery.