Daewoo Nexia

Since 1994 of release

Repair and car operation



Daewoo Nexia
+ The maintenance instruction
+ Maintenance service
+ The engine
+ 3. The engine (two top camshafts)
+ Cooling system
+ Топлевная and exhaust systems
+ Electric chain
+ 7. Ignition system
+ 8. The electronic block of management and gauges
+ Transmission
+ 10. A five-speed transmission and the main transfer RPO MM5
+ 11. Automatic Transmission
- Steering
   12.2. The general description
   12.3. The reechnyj steering mechanism in gathering
   12.4. Tips of steering draughts
   12.5. Steering draughts
   12.6. A casing картера the steering mechanism
   12.7. Муфта a steering shaft
   12.8. A sealing cover of an aperture of a forward board of the Body
   12.9. Плунжер рейки
   12.10. The Shaft-gear wheel
   12.11. Рейка
   12.12. The needle bearing
   12.13. The directing plug рейки
   12.14. Check of neutral position рейки
   12.15. Recommendations about replacement of consolidations in the hydraulic booster
   12.16. Check of level and having added a working liquid
   12.17. Removal of air from hydrosystem
   12.18. The steering mechanism with the hydraulic booster in gathering
   12.19. Hoses and pipelines
   12.20. A tank
   12.21. Tips of steering draughts
   12.22. Steering draughts
   12.23. Plugs of hinges of steering draughts
   12.24. Муфта a steering shaft
   12.25. A sealing cover
   12.26. Hydrocylinder pipelines
   12.27. Adjustment of a preliminary tightness of a spring плунжера
   12.28. Consolidations of a shaft of the hydrodistributor and the top bearing
   12.29. The steering mechanism
   12.30. Check of neutral position рейки
   12.31. A belt of a drive of the pump
   12.32. A pulley of a drive of the pump
   12.33. The pump in gathering
   12.34. Control levers on a steering column
   12.35. A steering wheel
   12.36. The ignition lock
   12.37. A steering column
   12.38. Lever the switch, a steering shaft, a steering column (noncontrollable)
   12.39. Lever the switch, a steering shaft, a steering column (regulated)
+ Running gear
+ 14. A forward suspension bracket
+ 15. A drive of forward wheels
+ 16. A back suspension bracket
+ Brake system
+ Body
+ Heating, ventilation
+ Electric equipment



12.6. A casing картера the steering mechanism To remove or disconnect

Dismantle of a casing and directing lath

AND. THE FLUTE ON CARTER FOR PLUG INSTALLATION
CENTURY THE FLUTE ON CARTER FOR PLUG INSTALLATION (FROM OUTSIDE THE STEERING MECHANISM)

8. ЗАГЛУШКА CARTER (LEFT)
10. DIRECTING PLANCK РЕЙКИ
16. THE CASING PLUG
17. THE CASING COLLAR
30. THE WASHER
31. THE CASING COLLAR
32. CARTER'S CASING
33. ДЕМПФЕР THE STEERING (ONLY FOR CARS WITH AUTOMATIC TRANSMISSION)
35. REZINOV АЯ THE ASSEMBLY PLUG
37. THE CASING PLUG

PERFORMANCE ORDER
1. To disconnect and remove the right rubber plug 36. The left plug 9 should not be dismantled, if it does not require replacement.
2. To cut off and throw out collars 17 and 31.
3. To pull together a casing 32 over the plug 37 with картера 7 steering mechanisms.
4. The plug 37 should not be dismantled, if it is not damaged.
5. Заглушку 8 it is necessary to dismantle from картера, only if it has defects.

To establish or attach

PERFORMANCE ORDER
1. To take out the plug 16 of a casing.
2. To put on a casing a new collar 17. To establish in a casing the plug 16.
3. The new plug 37 on картер if the old plug has been dismantled.
4. Directing lath 10 on рейку.
5. For simplification of assemblage to grease внутрен нюю an edge of the plug with 37 thin layer консистентной greasings.
6. A casing 32 on картер 7.
7. For simplification of assemblage partially to screw bolts 25 in рейку, preliminary having put on them washers. It is necessary for fixing of correct position рейки 34, laths 10 and a casing 32.
8. To shift a casing 32 lengthways картера up to the end so that the plug of 16 villages in the assembly flute executed on картере. To tighten a new collar 17 by means of adaptation KM-J-26610.
9. To put on other end of a casing the plug 37 established on картеже. To put on and tighten by means of adaptation Km-2b610 a new collar.