Daewoo Nexia

Since 1994 of release

Repair and car operation



Daewoo Nexia
+ The maintenance instruction
+ Maintenance service
+ The engine
+ 3. The engine (two top camshafts)
+ Cooling system
+ Топлевная and exhaust systems
+ Electric chain
+ 7. Ignition system
+ 8. The electronic block of management and gauges
+ Transmission
+ 10. A five-speed transmission and the main transfer RPO MM5
+ 11. Automatic Transmission
- Steering
   12.2. The general description
   12.3. The reechnyj steering mechanism in gathering
   12.4. Tips of steering draughts
   12.5. Steering draughts
   12.6. A casing картера the steering mechanism
   12.7. Муфта a steering shaft
   12.8. A sealing cover of an aperture of a forward board of the Body
   12.9. Плунжер рейки
   12.10. The Shaft-gear wheel
   12.11. Рейка
   12.12. The needle bearing
   12.13. The directing plug рейки
   12.14. Check of neutral position рейки
   12.15. Recommendations about replacement of consolidations in the hydraulic booster
   12.16. Check of level and having added a working liquid
   12.17. Removal of air from hydrosystem
   12.18. The steering mechanism with the hydraulic booster in gathering
   12.19. Hoses and pipelines
   12.20. A tank
   12.21. Tips of steering draughts
   12.22. Steering draughts
   12.23. Plugs of hinges of steering draughts
   12.24. Муфта a steering shaft
   12.25. A sealing cover
   12.26. Hydrocylinder pipelines
   12.27. Adjustment of a preliminary tightness of a spring плунжера
   12.28. Consolidations of a shaft of the hydrodistributor and the top bearing
   12.29. The steering mechanism
   12.30. Check of neutral position рейки
   12.31. A belt of a drive of the pump
   12.32. A pulley of a drive of the pump
   12.33. The pump in gathering
   12.34. Control levers on a steering column
   12.35. A steering wheel
   12.36. The ignition lock
   12.37. A steering column
   12.38. Lever the switch, a steering shaft, a steering column (noncontrollable)
   12.39. Lever the switch, a steering shaft, a steering column (regulated)
+ Running gear
+ 14. A forward suspension bracket
+ 15. A drive of forward wheels
+ 16. A back suspension bracket
+ Brake system
+ Body
+ Heating, ventilation
+ Electric equipment



12.27. Adjustment of a preliminary tightness of a spring плунжера
THE GENERAL DATA

Support рейки

AND. BEFORE ASSEMBLAGE TO GREASE WITH LITIEVOJ КОНСИСТЕНТНОЙ GREASING

14. ПЛУНЖЕР
15. THE SEALING RING
16. THE COUNTERNUT
17. THE ADJUSTING STOPPER
18. THE SPRING
55. CARTER

To adjust

Adjustment of a preliminary tightness of a spring плунжера рейки

AND. 15-MM THE HEAD

16. THE COUNTERNUT
17. THE ADJUSTING STOPPER
55. CARTER

PERFORMANCE ORDER
1. To weaken a counternut 16 and to wrap clockwise a stopper 17 against the stop in картер. Then to turn away a stopper on 30–40 degrees.
2. Adjustment is made at the hung out forward wheels in neutral position of a steering wheel. After adjustment it is necessary to check up stabilisation of operated wheels (self-return to neutral position).
3. To wrap a counternut 16. Keeping a stopper in motionless position, to tighten a counternut the moment of 70 Nanometers.