Daewoo Nexia

Since 1994 of release

Repair and car operation

12.18. The steering mechanism with the hydraulic booster in gathering

THE GENERAL DATA

The reechnyj steering mechanism with the hydraulic amplifier

1. COUPLING BOLT МУФТЫ 2. МУФТА 3. The SEALING COVER of the APERTURE of the FORWARD BOARD of the Body 4. THE SPRING RING 5. CONSOLIDATION (ПЫЛЬНИК), THE SHAFT. GEAR WHEELS 6. INTERNAL CONSOLIDATION OF THE SHAFT OF THE GEAR WHEEL 7. THE BEARING IN THE PLUG 8. SEALING RINGS OF THE SLEEVE OF THE DISTRIBUTOR 9. THE SPRING RING 10. THE DISTRIBUTOR IN GATHERING 11. SHAFT-GEAR WHEEL CONSOLIDATION 12. THE TOP PLUG OF THE SHAFT-GEAR WHEEL 13. THE SEALING RING 14. ПЛУНЖЕР 15. THE SEALING RING 16. THE COUNTERNUT 17. THE ADJUSTING STOPPER 18. THE SPRING 19. ЗАГЛУШКА CARTER (LEFT) 20. THE RUBBER ASSEMBLY PLUG 21. THE NUT 22. THE BEARING IN GATHERING 23. THE SPRING RING 24. THE COVER 25. GEAR РЕЙКА 26. THE CASING COLLAR 27. THE CASING PLUG

28. GO PLANCK РЕЙКИ 29. THE WASHER 30. THE ADJUSTING SCREW 31. THE TIP OF STEERING DRAUGHT (LEFT) 32. THE SEALING COVER 33. THE NUT 34. THE COUPLING BOLT 35. STEERING DRAUGHT (LEFT) 36. THE PLUG OF THE HINGE OF STEERING DRAUGHT 37. THE FIXING PLATE 38. THE BOLT 39. THE BASIC PLATE 40. STEERING DRAUGHT (RIGHT) 41. THE TIP OF STEERING DRAUGHT (RIGHT) 42. THE CASING COLLAR 43. THE CASING PLUG 44. CARTER'S CASING 45. THE WASHER 46. ROD CONSOLIDATION. 47. THE PISTON 48. THE SEALING RING 49. THE NUT 50. THE RUBBER ASSEMBLY PLUG 51. THE CYLINDER 52. THE SEALING RING OF THE PISTON 53. THE SEALING RING 54. THE DIRECTING PLUG OF THE ROD 55. CARTER OF THE STEERING MECHANISM 56. THE PIPELINE (TURN TO THE LEFT) 57. THE PIPELINE (TURN TO THE RIGHT)

Муфта a steering shaft

1. COUPLING BOLT МУФТЫ 2. МУФТА THE STEERING SHAFT IN GATHERING

Fastening of the steering mechanism

44. CARTER'S CASING 58. THE COLLAR

Fastening of internal hinges of steering draughts

35. STEERING DRAUGHT (LEFT) 37. THE FIXING PLATE 38. THE BOLT 39. THE BASIC PLATE 40. STEERING DRAUGHT (RIGHT) 44. CARTER'S CASING

To remove or disconnect

PERFORMANCE ORDER

1. A negative wire of the battery. 2. An air cleaner. 3. To disconnect both steering draughts 35 and 40, preliminary having removed fixing plate 37. The plate 37 is not subject to a reuse. 4. To disconnect both arms демпфера from картера the steering mechanism. 5. Демпфер a steering. 6. To turn away coupling bolts клеммовых connections муфты a steering shaft. 7. To pull together elastic муфту upwards on a steering shaft. 8. To disconnect from the distributor case delivery and drain pipelines. 9. To take out the steering mechanism from an aperture of the forward panel of the Body. To remove from the steering mechanism aperture consolidation in the forward panel of the Body. 10. To take out the steering mechanism through an aperture of a niche of the right wheel. The prevention If hairpins have been dismantled together with assembly collars, it is necessary to screw hairpins into place and to tighten the demanded moment.

To establish or attach

PERFORMANCE ORDER

1. The steering mechanism in gathering through an aperture hiss the right wheel. 2. Consolidation of a forward board of the Body on картер the steering mechanism. 3. To shift рейку in the average position corresponding to rectilinear movement of the car, and to establish both assembly collars of fastening картера to a forward board of the Body. To screw самоконтрящиеся nuts. The prevention Steering wheel spokes should be symmetrized concerning a vertical and to be directed downwards. 4. To tighten nuts of fastening of collars картера the steering mechanism the moment of 22 Nanometers. 5. To attach both steering bent for рейке. The prevention To use washers between a head of draught and a directing lath. To use only a new fixing plate. 6. To tighten bolts of fastening of steering draughts the moment of 90 Nanometers. 7. Демпфер a steering. To attach to картеру the mechanism both arms демпфера. To tighten fastening bolts демпфера a steering the moment of 22 Nanometers. 8. To lower муфту on a shaft-shes shaft терни and to tighten the bottom coupling bolt муфты. To tighten a coupling bolt муфты a steering shaft the moment of 22 Nanometers. 9. To extend upwards against the stop a steering shaft and to tighten the top coupling bolt муфты. To tighten a coupling bolt муфты a steering shaft the moment of 22 Nanometers. 10. To check up, that рейка the steering mechanism remained on the average position. 11. To attach a negative wire of the battery. 12. To attach to corresponding apertures картера delivery and drain pipelines. To tighten nuts of unions of pipelines the moment of 27 Nanometers. 13. An air cleaner.