Daewoo Nexia

Since 1994 of release

Repair and car operation



Daewoo Nexia
+ The maintenance instruction
+ Maintenance service
+ The engine
+ 3. The engine (two top camshafts)
+ Cooling system
+ Топлевная and exhaust systems
+ Electric chain
+ 7. Ignition system
+ 8. The electronic block of management and gauges
+ Transmission
+ 10. A five-speed transmission and the main transfer RPO MM5
+ 11. Automatic Transmission
- Steering
   12.2. The general description
   12.3. The reechnyj steering mechanism in gathering
   12.4. Tips of steering draughts
   12.5. Steering draughts
   12.6. A casing картера the steering mechanism
   12.7. Муфта a steering shaft
   12.8. A sealing cover of an aperture of a forward board of the Body
   12.9. Плунжер рейки
   12.10. The Shaft-gear wheel
   12.11. Рейка
   12.12. The needle bearing
   12.13. The directing plug рейки
   12.14. Check of neutral position рейки
   12.15. Recommendations about replacement of consolidations in the hydraulic booster
   12.16. Check of level and having added a working liquid
   12.17. Removal of air from hydrosystem
   12.18. The steering mechanism with the hydraulic booster in gathering
   12.19. Hoses and pipelines
   12.20. A tank
   12.21. Tips of steering draughts
   12.22. Steering draughts
   12.23. Plugs of hinges of steering draughts
   12.24. Муфта a steering shaft
   12.25. A sealing cover
   12.26. Hydrocylinder pipelines
   12.27. Adjustment of a preliminary tightness of a spring плунжера
   12.28. Consolidations of a shaft of the hydrodistributor and the top bearing
   12.29. The steering mechanism
   12.30. Check of neutral position рейки
   12.31. A belt of a drive of the pump
   12.32. A pulley of a drive of the pump
   12.33. The pump in gathering
   12.34. Control levers on a steering column
   12.35. A steering wheel
   12.36. The ignition lock
   12.37. A steering column
   12.38. Lever the switch, a steering shaft, a steering column (noncontrollable)
   12.39. Lever the switch, a steering shaft, a steering column (regulated)
+ Running gear
+ 14. A forward suspension bracket
+ 15. A drive of forward wheels
+ 16. A back suspension bracket
+ Brake system
+ Body
+ Heating, ventilation
+ Electric equipment



12.37. A steering column
THE GENERAL DATA

The prevention

The steering column is subject to dismantle only in following cases:

– The steering column demands replacement;
– The case for fastening of the lock of ignition and the blocking device of a steering shaft demands replacement;
– Other cases of repair connected with removal from the car of a steering column.


To remove or disconnect

PERFORMANCE ORDER
1. A negative wire of the battery.
2. Control levers indexes of turns and a screen wiper.
3. Electric conducting.
4. A flexible cable of the blocking device of the selector of ranges of a transmission and the ignition lock (only for cars with automatic transmission).
5. To establish a steering wheel in the neutral position corresponding to rectilinear movement of the car.
6. To turn out a coupling bolt клеммового connections муфты a steering shaft.
7. To turn out a bolt of fastening of an arm of a steering column to the instrument panel.
8. Sreznye plates under the instrument panel.
8а. Накернить a head left срезного a bolt.
8б. To drill an aperture a special drill for extraction of bolts (diameter of a drill 1/8 "– 3,175 mm).
8в. To insert into the drilled aperture adaptation N1411 for removal of bolts and to turn out срезной a bolt.
9. To remove a steering column and cautiously to put on support.

To establish or attach

Installation of a steering shaft

AND. THE CASING OF THE STEERING COLUMN
CENTURY THE STEERING SHAFT
WITH. THE ALIGNING PLUG
D. COUPLING BOLT МУФТЫ

Installation срезного a bolt of a steering column

AND. WASHER СРЕЗНОГО OF THE BOLT
CENTURY СРЕЗНОЙ THE BOLT
WITH. THE ARM OF THE CASING OF THE STEERING COLUMN

PERFORMANCE ORDER
1. To turn a steering wheel so that spokes were symmetrized concerning a vertical and have been directed downwards (position of a steering wheel for rectilinear movement of the car).
2. To establish aligning plug in a casing of a steering column.
3. To establish рейку the steering mechanism in the average position corresponding to rectilinear movement of the car.
4. To turn муфту a steering shaft so that an axis of an aperture for a coupling bolt settled down horizontally and from above a shaft.
5. Cautiously to insert a shaft of a steering shaft into an aperture муфты.
The prevention

It is necessary to support a steering column until it will not be fixed срезным by a bolt. It is forbidden to leave a steering column without a support.


6. To establish (without tightening) following fixing details:
      – срезные plates on the instrument panel;
      – A bolt of fastening of an arm of a casing of a steering column to the instrument panel. To tighten a bolt of fastening of an arm of a steering column to the instrument panel the moment of 22 Nanometers;
      – A coupling bolt клеммового connections муфты with steering shaft. (The bolt should be inserted into a smooth aperture without a carving). To tighten срезной a bolt located to the left of a steering column, the moment of the demanded size;
      – New самоконтрящуюся a nut (with a washer), located to the right of steering колот and the moment of the demanded size.
7. To extend a steering shaft upwards (against the stop the ball bearing of a shaft). To tighten a coupling bolt клеммового connection муфты a steering shaft the moment of 25 Nanometers.
8. To take out directing plug from a column casing, having left it on the helmsman to a shaft.
9. To attach electroconducting.
10. To attach a cable of a drive of the blocking device of the lock of ignition and the transmission selector (only for cars with automatic transmission).
11. To establish control levers indexes of turn and a screen wiper.
12. To check up installation of operated wheels in position for rectilinear movement.
13. A negative wire of the battery.