Daewoo Nexia

Since 1994 of release

Repair and car operation



Daewoo Nexia
+ The maintenance instruction
+ Maintenance service
- The engine
   2.1. Technical characteristics
   2.2. Greasing system
   2.3. Maintenance service and engine repair
   2.4. Compression check
   2.5. Dismantle and engine installation in gathering
   2.6. Engine support
   2.7. An inlet collector and a lining
   2.8. A final collector and a lining
   2.9. A cover of the case of a cam-shaft
   2.10. A pulley of a cranked shaft
   2.11. A forward cover of a gear belt
   2.12. A camshaft cogwheel
   2.13. A cogwheel of a cranked shaft
   2.14. A back cover of a gear belt
   2.15. Adjustment of a tension of a gear belt
   2.16. Check of angular position of a camshaft
   2.17. Forward consolidation of a cranked shaft
   2.18. A camshaft. Levers. Hydrojacks of backlashes
   2.19. Klapannye springs. Consolidations of cores of valves
   2.20. A head of cylinders. The camshaft case
   2.21. Repair of a head of the block of cylinders
   2.22. Dismantle of valves
   2.23. Directing plugs of valves
   2.24. Expansion of apertures of plugs
   2.25. Valves
   2.26. Klapannye springs
   2.27. Saddles of valves
   2.28. Consolidations of valves
   2.29. Height of a core of the valve concerning a head of the block of cylinders
   + 2.30. Pushers of valves with hydrojacks of backlashes
   2.31. The oil pallet
   2.32. A reception branch pipe with the oil filter
   2.33. The oil pump
   2.34. Repair of the oil pump
   2.35. Pistons and rods
   2.36. A flywheel. Back consolidation of a cranked shaft
   2.37. A cranked shaft
   2.38. Rods and radical bearings
   2.39. Replacement of loose leaves
   2.40. Piston group and rods
   2.41. Piston fingers and rings
   2.42. The block of cylinders
   2.43. Installation of pistons
   2.44. Balancing of a disk with a gear wreath
   2.45. Repair of carving apertures
   + 2.46. Diagnostics of malfunctions of the engine
+ 3. The engine (two top camshafts)
+ Cooling system
+ Топлевная and exhaust systems
+ Electric chain
+ 7. Ignition system
+ 8. The electronic block of management and gauges
+ Transmission
+ 10. A five-speed transmission and the main transfer RPO MM5
+ 11. Automatic Transmission
+ Steering
+ Running gear
+ 14. A forward suspension bracket
+ 15. A drive of forward wheels
+ 16. A back suspension bracket
+ Brake system
+ Body
+ Heating, ventilation
+ Electric equipment



2.6. Engine support
THE GENERAL DATA

The prevention

In avoidance травмирования it is necessary to watch closely correctness of installation and reliability of fastening of the engine to technological a traverse, established over a motor compartment.


The engine in gathering. Engine support

 

201. THE ARM OF THE BACK SUPPORT
202. The BOLT of the BACK SUPPORT (the MOMENT of the INHALING of 65 Nanometers)
203. THE BACK SUPPORT
204. THE WASHER
205. THE NUT
206. THE WASHER
207. The BOLT (the MOMENT of the INHALING of 25 Nanometers)
208. THE LEFT FORWARD SUPPORT
209. THE WASHER
210. The BOLT (the MOMENT of the INHALING of 75 Nanometers)
211. THE ARM OF THE LEFT FORWARD SUPPORT
212. The BOLT (the MOMENT of the INHALING of 60 Nanometers)
213. The BOLT (the MOMENT of the INHALING of 60 Nanometers)
214. THE ARM OF THE RIGHT FORWARD SUPPORT
215. The BOLT (the MOMENT of the INHALING of 65 Nanometers)
216. THE RIGHT FORWARD SUPPORT
217. THE HOLDER OF THE RIGHT FORWARD SUPPORT
218. THE WASHER
219. The NUT (the MOMENT of the INHALING of 40 Nanometers)

Traverse for engine fastening

 


Forward left support of the engine

208. THE LEFT FORWARD SUPPORT
211. THE ARM OF THE LEFT FORWARD SUPPORT
212. The BOLT of FASTENING of the ARM To CARTER of TRANSMISSION (the MOMENT of the INHALING of 60 Nanometers)
213. The BOLT of FASTENING of the ARM To the SUPPORT (the MOMENT of the INHALING of 60 Nanometers)


Back support of the engine

202. The BOLT of the BACK SUPPORT (the MOMENT of the INHALING of 65 Nanometers)
203. THE BACK SUPPORT
204. THE WASHER
205. THE NUT
206. THE WASHER
207. The BOLT (the MOMENT of the INHALING of 25 Nanometers)

To check up

PERFORMANCE ORDER
1. To raise the Engine, to unload rubber pillows of support.
2. A surface of rubber pillows on presence of cracks because of an overheat.
3. Backlog of rubber pillows from plates.
4. Presence of cracks and ruptures of rubber in the middle of pillows.
5. Easing of an inhaling of bolts and nuts.

To remove or disconnect


PERFORMANCE ORDER
1. A negative wire of the storage battery.
2. To suspend the Engine on a traverse.
3. A bolt 213 right forward support.
4. Bolts 215 right forward support.
5. Nuts 219 and washers 218 right forward support.
6. Bolts 213 left forward support.
7. Bolts 212 left forward support.
8. Bolts 210 and washers 209 left forward support.
9. A nut 205, a bolt 202, a washer 204 and an arm of a back support.
10. Bolts 207, washers 206 and a back support of the engine from the car.

To establish or attach

PERFORMANCE ORDER
1. A bolt 202, a washer 204, a nut 205 back support.
2. Bolts 207, washers 206.
3. To attach an arm of a forward left support bolts 212 (the moment of an inhaling of 60 Nanometers).
4. To attach an arm 211 bolts 213 (the moment of an inhaling of 60 Nanometers).
5. Bolts 210 with washers 209.
6. A bolt 213 right forward support.
7. Bolts of 215 fastenings of an arm of the right forward support.
8. Nuts 219 and washers 218.
9. To remove to a traverse.
10. To tighten bolts and nuts the demanded moment, adhering to sequence: bolts 202, 207, 210, a nut 219.
11. A negative wire of the storage battery.