Daewoo Nexia

Since 1994 of release

Repair and car operation

Daewoo Nexia
+ The maintenance instruction
+ Maintenance service
+ The engine
- 3. The engine (two top camshafts)
   3.2. The general description
   3.3. Work of hydraulic jacks of backlashes
   3.4. Greasing system
   3.5. Maintenance service and repair
   3.6. Compression check
   3.7. Dismantle and engine installation in gathering
   3.8. A klinovoj belt
   3.9. Engine support
   3.10. An inlet collector and a lining
   3.11. A final collector and a lining
   3.12. A cover клапанного the mechanism and a lining
   3.13. A pulley of a cranked shaft
   3.14. A forward cover of a gear belt
   3.15. A gear belt
   3.16. Натяжитель a gear belt
   3.17. A camshaft cogwheel
   3.18. A cogwheel of a cranked shaft
   3.19. A back cover of a gear belt
   3.20. Forward consolidation of a cranked shaft
   3.21. A camshaft. Hydrojacks of backlashes of valves
   3.22. A head of the block of cylinders
   3.23. Repair of a head of the block of cylinders
   3.24. Klapannye springs. Consolidations of cores of valves
   3.25. Dismantle of valves
   3.26. Directing plugs of valves
   3.27. Expansion of apertures of plugs
   3.28. Valves
   3.29. Klapannye springs
   3.30. Saddles of valves
   3.31. The oil pallet
   3.32. A reception branch pipe with the oil filter
   3.33. The oil pump
   3.34. Repair of the oil pump
   3.35. Pistons and rods
   3.36. A flywheel. Back consolidation of a cranked shaft
   3.37. A cranked shaft
   3.38. Rods and radical bearings
   3.39. Replacement of loose leaves
   3.40. Piston fingers and rings
   3.41. The block of cylinders
   3.42. Installation of pistons
   3.43. Balancing of a disk with a gear wreath
   3.44. Repair of carving apertures
   3.45. Diagnostics of malfunctions
+ Cooling system
+ Топлевная and exhaust systems
+ Electric chain
+ 7. Ignition system
+ 8. The electronic block of management and gauges
+ Transmission
+ 10. A five-speed transmission and the main transfer RPO MM5
+ 11. Automatic Transmission
+ Steering
+ Running gear
+ 14. A forward suspension bracket
+ 15. A drive of forward wheels
+ 16. A back suspension bracket
+ Brake system
+ Body
+ Heating, ventilation
+ Electric equipment

3.13. A pulley of a cranked shaft

THE GENERAL DATA

Dismantle of a pulley of the pump of the steering amplifier

Dismantle of a pulley of a cranked shaft

To remove or disconnect

PERFORMANCE ORDER

1. A negative wire of the storage battery.

2. To weaken a tension and to remove a belt of the compressor of the conditioner.

3. To weaken fastening of the generator and to release приводной a belt.

4. Keeping a key of 9 mm a pulley from rotation, to unscrew bolts In and to remove a pulley And.

5. A forward cover 73 gear belts, having turned out 2 bolts 75.

6. Keeping a key of 24 mm a camshaft from rotation, to unscrew a bolt 159, to remove a washer 158 and a pulley 157.

To establish or attach

PERFORMANCE ORDER

1. Keeping a key of 24 mm a camshaft from rotation, to wrap a bolt 159, preliminary having established a washer 158 and a pulley 157.

2. To tighten a bolt of a pulley of a cranked shaft the moment of 155 Nanometers.

3. A forward cover 73 gear belts, having screwed 2 bolts 75.

4. A pulley of the pump of the steering amplifier. Keeping a key of 9 mm a pulley from rotation, to screw in three bolts of Century

5. To establish belts on a pulley of the generator and a compressor pulley.

6. A negative wire of the storage battery.