Daewoo Nexia

Since 1994 of release

Repair and car operation


Daewoo Nexia
+ The maintenance instruction
+ Maintenance service
+ The engine
+ 3. The engine (two top camshafts)
+ Cooling system
+ Топлевная and exhaust systems
+ Electric chain
+ 7. Ignition system
+ 8. The electronic block of management and gauges
+ Transmission
- 10. A five-speed transmission and the main transfer RPO MM5
   10.2. The general description
   10.3. Diagnostics of malfunctions
   10.4. The possible reasons of the raised noise of a transmission
   10.5. Level check трансмиссионного oils
   10.6. Adjustment of a drive of the mechanism of switching
   10.7. The gear change lever
   10.8. The floor mechanism of management of a transmission
   10.9. Draught of the mechanism of management
   10.10. The intermediate lever
   10.11. A speedometer drive
   10.12. A cover of the mechanism of the switch
   10.13. Consolidations of semiaxes
   10.14. Transmissions in gathering
   10.15. Dismantling of a transmission and the main transfer
   10.16. Characteristic malfunctions of a transmission and the possible reasons
+ 11. Automatic Transmission
+ Steering
+ Running gear
+ 14. A forward suspension bracket
+ 15. A drive of forward wheels
+ 16. A back suspension bracket
+ Brake system
+ Body
+ Heating, ventilation
+ Electric equipment


1cb365f7

10.8. The floor mechanism of management of a transmission
THE GENERAL DATA

The hinge of the lever of switching

203. THE GEAR CHANGE LEVER
204. THE AXIS OF THE LEVER WITH THE SPRING CLAMP
205. КРЕСТОВИНА THE HINGE OF THE LEVER OF SWITCHING

Directing and assembly plugs

244. THE DIRECTING PLUG
245. THE ASSEMBLY PLUG

Carter and the platen of the mechanism of management of a transmission

209. CARTER OF THE MECHANISM OF MANAGEMENT OF THE TRANSMISSION
241. THE PLATEN

To remove or disconnect

Dismantle of an axis with a spring clamp

204. THE AXIS OF THE LEVER WITH THE SPRING CLAMP

Console dismantle

AND. TO PULL BACK
CENTURY SCREWS
WITH. THE BACK PART OF THE CONSOLE

PERFORMANCE ORDER
1. A negative wire of the battery.
2. To weaken a bolt 210 клеммового connections and to disconnect a tip 213 from the platen 241.
2а. To remove a cover 240.
3. A back part of the console.
4. To translate the lever 203 in neutral position.
5. The lever 203 and a cover 202.
5а. To turn a clamp of an axis 204 on an arrow and to dismantle an axis from an aperture levers.
6. The console completely.
7. To turn out bolts of 208 fastenings картера.
8. The platen 241 and картер 209.
8а. To take out the platen from картера.
9. To take out directing plug 244 and the assembly plug 245 of an aperture картера 209.
10. To take out the plug 244 of the plug 245.

To establish or attach

Installation of the platen of the mechanism of management by a transmission

209. CARTER OF THE MECHANISM OF MANAGEMENT OF THE TRANSMISSION
210. THE BOLT
211. THE WASHER
240. THE COVER
241. THE PLATEN
244. THE DIRECTING PLUG
245. THE ASSEMBLY PLUG

Installation of plugs in картере the mechanism

209. CARTER OF THE MECHANISM OF MANAGEMENT OF THE TRANSMISSION
245. THE PLUG

PERFORMANCE ORDER
1. To insert the plug 244 into the plug 245.
2. Запрессовать the plug 245 in an aperture картера 209 from within.
3. To put in internal flutes of the plug 244 silicone greasing of mark 1052863 or equivalent.
4. To insert the platen 241 in картер 209 and into an aperture of the plug 244.
5. To establish into place картер 209 with the platen 241 and to screw bolts 208.
6. The console.
7. To establish the lever 203 in крестовину 205, to insert an axis with a clamp 204. To turn a clamp in initial position.
8. A cover 240.
9. To insert a tip 213 into the platen 241.
10. To adjust a drive and position of the lever of switching. Then to tighten a bolt 210 клеммового connections.
11. The central console.
12. A negative wire of the battery.