Daewoo Nexia

Since 1994 of release

Repair and car operation



Daewoo Nexia
+ The maintenance instruction
+ Maintenance service
+ The engine
+ 3. The engine (two top camshafts)
+ Cooling system
+ Топлевная and exhaust systems
+ Electric chain
+ 7. Ignition system
+ 8. The electronic block of management and gauges
- Transmission
   9.2. The general description
   9.3. Diagnostics of malfunctions
   9.4. A cable of a drive of coupling
   9.5. A coupling pedal
   9.6. Conducted and press disks, a coupling drive
   9.7. Removal of air from a hydraulic drive of coupling
   9.8. The main cylinder
   9.9. The working cylinder of coupling
   9.10. The basic malfunctions of coupling, their reason and ways of elimination
+ 10. A five-speed transmission and the main transfer RPO MM5
+ 11. Automatic Transmission
+ Steering
+ Running gear
+ 14. A forward suspension bracket
+ 15. A drive of forward wheels
+ 16. A back suspension bracket
+ Brake system
+ Body
+ Heating, ventilation
+ Electric equipment



9.2. The general description
THE GENERAL DATA

Coupling with тросовым a drive

 

1. THE PLATEN WITH THE LEVER
2. THE CLIP
3. THE CABLE TIP
4. THE NUT
5. THE PLUG
6. THE WASHER
7. ШПЛИНТ
8. THE NUT
9. THE WASHER
10. THE KERCHIEF
11. THE AXIS
12. THE RETURNABLE SPRING
13. THE OVERLAY
14. THE PEDAL
15. CARTER'S PALLET
16. THE BOLT
17. CONSOLIDATION OF THE SHAFT OF THE PRIMARY SHAFT
18. THE RING
19. DIRECTING PLUG VYZHIMNOGO OF THE BEARING
20. THE BEARING OF DEENERGIZING OF COUPLING
21. THE PLUG
22. THE PLATEN PLUG
23. THE WASHER
24. THE BOLT
25. THE CONDUCTED DISK
26. THE CASING OF COUPLING WITH THE PRESS DISK AND ДИАФРАГМЕННОЙ THE SPRING
27. THE WASHER
28. THE BOLT
29. THE BOLT

The basic knots of coupling

20. THE BEARING OF DEENERGIZING OF COUPLING
25. THE CONDUCTED DISK
26. THE CASING OF COUPLING WITH THE PRESS DISK AND ДИАФРАГМЕННОЙ THE SPRING
101. THE ENGINE FLYWHEEL

Coupling includes group of the leading details, a conducted disk and a drive. Carter of coupling is executed at the same time with картером mechanical transmission.

Press a disk and диафрагменная a spring are established in a steel stamped casing of coupling. The casing is attached by bolts to a flywheel. Leading surfaces of a friction of a flywheel and a press disk are processed by grinding.

The conducted disk has шлицевую a nave which is established on a shaft of a primary shaft of a transmission with possibility of axial movings. Shlitsevoe connection of a conducted disk and a primary shaft is intended for transfer of a twisting moment of the engine. The conducted disk is clamped between a flywheel and a press disk of coupling диафрагменной a spring.

The drive includes a coupling pedal, a cable, the platen with the lever, a plug and the bearing of deenergizing of coupling (выжимной the bearing). By pressing a pedal of coupling the cable pulls for the external lever of the platen and turns the platen with the plug fixed on it. Plug levers move press the bearing and influence petals диафрагменной springs, switching off coupling.