Since 1994 of release
Repair and car operation
+ The maintenance instruction
- Maintenance service
1.2. The general instructions on repair
1.2. Identification number of the car
1.3. Car lifting
1.4. Car maintenance service
- 1.5. Control surveys and the servicing, spent by the owner
1.5.1. At car driving
1.5.2. At each refuelling of fuel
1.5.3. Monthly Maintenance service
1.5.4. The maintenance service, spent two times a year
1.5.5. At each replacement of engine oil
1.5.6. Annual Maintenance service
1.6. The moments of an inhaling of carving connections
1.7. Characteristics of the car with system of multidot injection of fuel
1.8. Characteristics of cars (2 top camshafts of the engine)
1.9. The sizes and weight of cars
+ The engine
+ 3. The engine (two top camshafts)
+ Cooling system
+ Топлевная and exhaust systems
+ Electric chain
+ 7. Ignition system
+ 8. The electronic block of management and gauges
+ 10. A five-speed transmission and the main transfer RPO MM5
+ 11. Automatic Transmission
+ Running gear
+ 14. A forward suspension bracket
+ 15. A drive of forward wheels
+ 16. A back suspension bracket
+ Brake system
+ Heating, ventilation
+ Electric equipment
Check of a condition and work of seat belts
Check up serviceability of all elements of seat belts: integrity of belts, action of locks, devices of tightening of belts and directing loops, reliability of fastening of draughts.
Check of serviceability of headrests
If the car is equipped by adjustable headrests, check up reliability of their fixing in the chosen position.
Fastening of a spare wheel and jack
Be attentive to knocks and noise in a back part of the car. Check up reliability of fastening in marching position of a spare wheel, a jack and other tools. After use grease the ratchet or screw mechanism of a jack.
Service of locks of doors
Grease cylinders of locks of doors.
Service of details of the Body
Grease loops навески doors, a cowl, a luggage carrier, лючка mouths of a fuel tank, covers перчаточного a box and the console, locks and latches, and also all mobile connections of collapsible seats.
Check of blocking of inclusion of a starter (automatic transmission)
Before check of serviceability of the blocking device be convinced that about the car is available enough free space. Then completely include a lay brake and press a brake pedal. Do not press an accelerator pedal. If the Engine is started, be ready to switch off ignition at once.
Check of a lay brake and the mechanism of blocking of an automatic transmission in position of selector R (Parking)
For check of efficiency of action of a lay brake and the mechanism of blocking of an automatic transmission stop the car on abrupt enough bias. The bias should be free on a case of movement of the braked car. For a risk exception травмирования people being nearby and property damages be ready to press quickly a brake pedal if the car gets under way from a place and will sweep under a bias. Check of a lay brake is made at the working engine, the selector should be in position N (Neutral). Gradually weakening pressing a brake pedal, completely release it. The car should be kept on a bias in motionless position by one lay brake. For check of serviceability of the mechanism of blocking of an automatic transmission move the selector in position Р (Parking), switch off a lay brake and gradually release a brake pedal.
Sink of the bottom of the Body
At least, every spring wash the bottom of the Body with a stream of water for removal of adjournment коррозионноактивных the substances used for struggle against ice on roads. Carefully wash out all places of a possible congestion of a dirt.
In hard-to-reach spots it is necessary to humidify the hardened mud adjournment preliminary.
System of cooling of the engine
Check up a condition and temperature of freezing of a cooling liquid. At pollution of a cooling liquid or occurrence of rusty colour merge a liquid, wash out system of cooling and fill with its new cooling liquid. Apply cooling liquid only the recommended concentration to maintenance of low temperature of freezing, protection of system of cooling from corrosion and maintenance of a normal temperature mode of the engine. Check up a condition of hoses and replace them in the presence of cracks, swellings and other defects. Tighten collars. Clear external surfaces of a radiator and the condenser of the conditioner of air. Wash out a jellied mouth and a cover. Check of system of cooling under superfluous pressure and check of adjustment of valves of a cover of a radiator Is recommended also.