Daewoo Nexia

Since 1994 of release

Repair and car operation



Daewoo Nexia
+ The maintenance instruction
+ Maintenance service
+ The engine
+ 3. The engine (two top camshafts)
+ Cooling system
+ Топлевная and exhaust systems
+ Electric chain
+ 7. Ignition system
+ 8. The electronic block of management and gauges
+ Transmission
+ 10. A five-speed transmission and the main transfer RPO MM5
+ 11. Automatic Transmission
+ Steering
+ Running gear
+ 14. A forward suspension bracket
+ 15. A drive of forward wheels
+ 16. A back suspension bracket
+ Brake system
+ Body
- Heating, ventilation
   19.2. Air central air
   19.3. Diagnostics of malfunctions
   19.4. Features of the conditioner
   19.5. Work of a central air of air
   + 19.6. Management of air central air
   19.7. The relay and switches
   + 19.8. Diagnostics of malfunctions
   - 19.9. Maintenance service
      19.9.1. Replacement of sealing rings
      19.9.2. Rules of the reference with a coolant
      19.9.3. Rules of installation of connections of pipelines
      19.9.4. Maintenance of chemical cleanliness of a coolant and refrigerating oil
      19.9.5. A discharge, having added oils, откачка air, gymnastics of system KV a coolant
      19.9.6. Filter-vlagopoglotitelja installation
      19.9.7. Receiver maintenance service
   + 19.10. Removal and installation of knots of a central air of air
   19.11. Compressor V-5 – the work description
+ Electric equipment



19.9.2. Rules of the reference with a coolant
THE GENERAL DATA

Working body in system KB is the coolant representing a chemical mix which represents health hazard and demands observance of certain rules of the reference. At the work, connected with system KB depressurization, it is necessary to use always goggles and to wrap up штуцерные connections and valves a pure fabric. All works with system KB are necessary for spending in good проветривае мом a premise and to avoid a coolant steam inhalation. It is forbidden to make welding or processing by steam of any pipelines and knots of system KB without preliminary dismantle from the car. At contact of a coolant to open sites of a body it is necessary to wash out these sites a water stream. The coolant is transported and stored in capacities with the strong metal screw covers protecting from damages the valve and a safety stopper. It is recommended to establish a cover into place after each use of capacity. It is forbidden to transport capacities with a coolant in passenger branch of the car.